Legacy
VIP Driver
VIP Driver is at the heart of the VIP video display system, acting as the interface between any DVI or HDMI video source and all MVP or PVP and C6 video panels via the CHAUVET LED Studio software (provided free). Rackmountable, it has two signal outputs, each driving up to 655,360 LEDs, which connect via Neutrik etherCON to any configuration of the VIP panels. It allows media playback, configuration, addressing and remote power control of the panels. It is scalable to link up to 4 units in a single system (5,242,880 LEDs total capacity).
Downloads
Features
- Video driver used to convert standard video signals (DVI, HDMI) to Ethernet-based video wall protocol
- Required for panel calibration and video conversion to CHAUVET video panels
- CHAUVET LED Studio software connects directly to the VIP Driver via USB for panel configuration
- Accepts either DVI or HDMI video source input
- 2 Neutrik etherCON outputs (655,360 LEDs capacity each)
- Capable of up to 1,310,720 LEDs and is scalable to link up to 4 units in a single system
- (5,242,880 LEDs total capacity)
Construction/Physical
- Dimensions: 19 x 10 x 1.7 in (483 x 254 x 44 mm)
- Weight: 5 lb (2.27 kg)
- Housing Material: Aluminum alloy
- Rackmount: 1U
Connections
- Power Connection: Edison (Local) plug to IEC
- Power Input: IEC
- Data Connectors: Neutrik etherCON (2), USB
- Cable Length (power): 5 ft (1.5 m)
- Video Input: DVI-I or HDMI (requires progressive scan, not interlaced)
- Video Output: Neutrik etherCON (2)
- Linking Connection: RS-232 (9-pin)
- Software Connection: USB
Control
- Control Protocol: LINSN
- Maximum Supported LEDs (per VIP Driver): 1,310,720
- Maximum Supported LEDs (4 VIP Drivers total): 5,242,880
Electrical
- Input Voltage: 100 to 240 VAC, 50/60 Hz (auto-ranging)
- Power and Current: 40 W, 0.33 A @ 120 V, 60 Hz
- Power and Current: 40 W, 0.19 A @ 208 V, 60 Hz
- Power and Current: 40 W, 0.17 A @ 230 V, 50 Hz
Certifications/Qualifications
- CE, FCC
- IP Rating: IP20, dry location
What’s Included
- VIP Driver
- IEC power cord
- USB cable
- 9-pin serial male to female cable (RS-232)