Accessories | Chauvet Video

Rigging Hardware

REM-RB50CM IP Curve

REM-RB100CMIP and REM-RB50CMIP Curve are rugged IP65-rated rig bars that perform dual functions. They may be used to hang the video wall overhead, and also for ground stacking purposes, by adding in the GROUNDSUPPORT2KIT.

REM-RB100CM IP

DRB-F100CMIP

DRB-F100CMIP and DRB-F50CMIP are newly designed IP65-rated rig bars that perform dual functions. They may be used to hang the video wall overhead, and also for ground stacking purposes, by adding in the GROUNDSUPPORT2KIT.

DRB-F50CMIP

RB-F50CM

The RB-F50CM Rig Bar from CHAUVET Professional is available for hanging F-Series video panel products from truss or pipe with ease. The RB-F50CM ships with M20 eyebolts, and is ideally used with 5/8” shackles for quick and easy installation. The RB-F50CM works seamlessly with the RB-F100CM.

DRB-F50CM

DRB-F50CM and the DRB-F100CM are newly designed rig bars that perform dual functions. They may be used to hang the video wall overhead, and also for ground stacking purposes, by adding in the new GROUNDSUPPORT2KIT.

DRB-F100CM

DRB-F100CM and the DRB-F50CM are newly designed rig bars that perform dual functions. They may be used to hang the video wall overhead, and also for ground stacking purposes, by adding in the new GROUNDSUPPORT2KIT.

Ground Stack Kit

Our Ground Stack Kit provides a complete ground support solution for stacking REM1, REM3IP, F2, F3/F3X, F4IP/F4XIP, and F5IP video panels, and supports flat, convex and concave video walls, including 2.5° and 5° convex curves, 5° and 10° concave curves.

GROUND SUPPORT 2 KIT

The Ground Support 2 Kit is a proper and safe ground support/stacking system for professional video wall setups. It utilizes the new dual function rig bars to provide a clean, setup for your clients, and is capable of supporting up to 15 video panels of the F-series. Ships in road case with internal dividers to aid in the fast setup of the system for production/rental events.

DRB-CURVEKITX2

The DRB-CURVEKITX2 curves the new dual function rig bars. Included in the box are 2pcs 5 degree brackets and 2pcs 10 degree brackets which support concave curves.

VIDCURVEKIT

VIDCURVEKIT curves one panel of the F2, F5IP, F4IP in concave angles, and is selectable between 5 and 10 degrees.

Control

NovaStar MX40 Pro

NovaStar MX40 Pro is an all-in-one LED display controller that integrates video processing and control in a high-performance solution for the most demanding live and on-camera applications.

NovaStar MX20

NovaStar MX20 is an all-in-one LED display controller that combines video processing and control in one 19" 1U rack or desk mountable solution.

VIP Drive 10-5 Nova

VIP Drive 10-5 Nova is a streamlined all-in-one video processor that outputs signal to any NovaStar video panel. The integrated 3-layer Scaler supports full screen, pixel to pixel, and custom scaling options.

VIP Drive 83R Nova

VIP Drive 83R Nova is a streamlined all-in-one video wall mapper/ switcher for use with the Novastar video control protocol. With three inputs, eight outputs, it will map your video wall, switch your video source, and handle sending/receiving via fiber for long transmissions, eliminating the need for individual mappers and video switchers.

etherCON Extensions

Connector: Neutrik etherCON
Length: 18 in (45.7 cm), 5 ft (1.5 m), 10 ft (3 m), 25 ft (7.6 m), 50 ft (15 m)
Cabling Type: CAT6E
Termination: 568B

powerCON Extensions

Connector: Neutrik powerCON (NAC3FCA)
Length: 18 in (45.7), 5 ft (1.5 m), 10 ft (3 m), 25 ft (7.6 m), 50 ft (15 m)
Wire Size: 14

IP65 Rated Seetronic® Powerkon Extensions

Connector: Seetronic® Powerkon IP65
Length: 5 ft (1.5 m), 10 ft (3 m), 25 ft (7.6 m)
Wire Size: 3x14
IP Rating: IP65

Software

ArKaos MediaMaster Express

ArKaos MediaMaster Express allows anyone to exploit the possibilities of a powerful media server. It combines ease of use with high performance for quick media management and playback on VIP displays. This software maps video content across your screen.

Module Removal Tools

MT-05

This LED module removal/installation tool is specially designed for the F5IP video panels. It attaches with 4 thumbscrews to the center position of any F5IP LED module and includes an easy to use handle to keep tight grip of the modules.

MT-04

This LED module removal/installation tool is specially designed for the F4IP video panels. It attaches with 4 thumbscrews to the center position of any F4IP LED module and includes an easy to use handle to keep tight grip of the module.

MT-07

Universal LED Module removal/installation tool that works with all CHAUVET Professional video panels, including F-series and REM-series. Convenient battery-powered tool for front-service module access. Creates vacuum over LED module surface to apply even pulling force, preventing damage to LEDs on LED modules. Includes battery charger and carry case.